Full Complement Roller Bearings

Cageless, full-complement cylindrical roller bearings have the maximum possible number of rollers and can sustain much heavier loads than cylindrical roller bearings of the same size with cages. On the other hand, high-speed capability is inferior to the bearings with cages.

The open-type single- and double-row bearings are mostly used in general industrial applications at low speed and under heavy load, and the shielded-type double-row bearings are often used in crane sheaves.

Full Complement Cylindrical Roller Bearings SL04 Series

Full Complement Cylindrical Roller Bearings SL1850 Series

Full Complement Cylindrical Roller Bearing SL18 Series

Send E-mail Request Quote

Product Parameter

SL04 Series

Full Complement Cylindrical Roller Bearings SL04 Series

Full Complement Cylindrical Roller Bearings SL04 Series always sealed on both sides and filled with grease. The two-piece inner ring has three integral flanges and is fixed together by a retaining ring. The outer ring has an integral central flange. This kind of bearings can be used to locate a shaft axially in both directions. The outer rings has two snap groove and is one millimeter narrower than inner ring.

Type	Dimensions				Rated load(KN)		Limiting Speed	Mass	SKF
	(mm)				Rated load(KN)		(r/min)	(kg)
	d	D	B	C	Cr	Cor
SL045004PPX	20	42	30	29	41.5	50	8500	0.2	NNF5004
SL045005PPX	25	47	30	29	44.6	62	7500	0.23	NNF5005
SL045006PPX	30	55	34	33	52.8	75	6500	0.35	NNF5006
SL045007PPX	35	62	36	35	66	91.5	5500	0.45	NNF5007
SL045008PPX	40	68	38	37	82	113	5000	0.56	NNF5008
SL045009PPX	45	75	40	39	95	141	4500	0.68	NNF5009
SL045010PPX	50	80	40	39	103	154	4200	0.76	NNF5010
SL045011PPX	55	90	46	45	119	180	3800	1.18	NNF5011
SL045012PPX	60	95	46	45	123	195	3500	1.26	NNF5012
SL045013PPX	65	100	46	45	128	209	3300	1.33	NNF5013
SL045014PPX	70	110	54	53	172	270	3000	1.85	NNF5014
SL045015PPX	75	115	54	53	198	305	2800	2	NNF5015
SL045016PPX	80	125	60	59	206	335	2600	2.71	NNF5016
SL045017PPX	85	130	60	59	215	360	2500	2.83	NNF5017
SL045018PPX	90	140	67	66	310	520	2300	3.88	NNF5018
SL045019PPX	95	145	67	66	315	540	2200	3.95	NNF5019
SL045020PPX	100	150	67	66	330	550	2200	4.05	NNF5020
SL045022PPX	110	170	80	79	395	680	1900	6.45	NNF5022
SL045024PPX	120	180	80	79	410	740	1800	6.9	NNF5024
SL045026PPX	130	200	95	94	550	980	1600	10.5	NNF5026
SL045028PPX	140	210	95	94	630	1120	1500	11.1	NNF5028
SL045030PPX	150	225	100	99	710	1270	1400	13.5	NNF5030
SL045032PPX	160	240	109	108	740	1370	1300	16.5	NNF5032
SL045034PPX	170	260	122	121	960	1760	1300	22.5	NNF5034
SL045036PPX	180	280	136	135	1140	2140	1200	30	NNF5036
SL045038PPX	190	290	136	135	1170	2230	1100	31.5	NNF5038
SL045040PPX	200	310	150	149	1370	2650	1000	40.5	NNF5040
SL045044PPX	220	340	160	159	1580	3100	950	52.5	NNF5044
SL045048PPX	240	360	160	159	1650	3350	900	57.5	NNF5048
SL045052PPX	260	400	190	189	2380	4700	800	84.5	NNF5052
SL045056PPX	280	420	190	189	2600	5200	800	90	NNF5056
SL045060PPX	300	460	218	216	3000	5900	700	126	NNF5060
SL04130PPX	130	190	80	79	430	790	800	7.5	319426 DA-2LS
SL04140PPX	140	200	80	79	445	840	750	8	319428 DA-2LS
SL04150PPX	150	210	80	79	465	920	700	8.4	319430 DA-2LS
SL04160PPX	160	220	80	79	480	970	700	8.8	319432 DA-2LS
SL04170PPX	170	230	80	79	490	1030	650	9.3	319434 DA-2LS
SL04180PPX	180	240	80	79	500	1080	600	9.8	319436 DA-2LS
SL04190PPX	190	260	80	79	520	1160	550	12.7	319438 DA-2LS
SL04200PPX	200	270	80	79	540	1210	550	13.2	319440 DA-2LS

SL1850 Series

Full Complement Cylindrical Roller Bearings SL1850 Series

Full Complement Cylindrical Roller Bearings SL1850 Series has three integral flanges on the inner ring and one integral flange on the outer ring. This kind of bearing can provide axial location for a shaft in one direction. A snap ring is inserted in the outer ring at the side opposite the integral flange.

Type	Dimensions			Rated load		Limiting speed	Mass	SKF
	(mm)			(KN)		(r/min)	(kg)
	d	D	B	Cr	Cor
SL185004	20	42	30	47.5	53	9000	0.2	NNCF5004V
SL185005	25	47	30	54	65	7500	0.23	NNCF5005V
SL185006	30	55	34	70	86	6500	0.35	NNCF5006V
SL185007	35	62	36	85	109	5500	0.46	NNCF5007V
SL185008	40	68	38	101	136	5000	0.56	NNCF5008V
SL185009	45	75	40	108	151	4600	0.71	NNCF5009V
SL185010	50	80	40	131	184	4300	0.76	NNCF5010V
SL185011	55	90	46	179	270	3700	1.16	NNCF5011V
SL184912	60	85	25	67	115	3700	0.48	NNCF4912V
SL185012	60	95	46	184	280	3500	1.24	NNCF5012V
SL185013	65	100	46	194	310	3200	1.32	NNCF5013V
SL184914	70	100	30	103	178	3200	0.78	NNCF4914V
SL185014	70	110	54	229	340	3100	1.85	NNCF5014V
SL185015	75	115	54	242	375	2800	1.93	NNCF5015V
SL184916	80	110	30	109	199	2900	0.88	NNCF4916V
SL185016	80	125	60	295	450	2600	2.59	NNCF5016V
SL185017	85	130	60	305	470	2500	2.72	NNCF5017V
SL184918	90	125	35	149	280	2500	1.35	NNCF4918V
SL185018	90	140	67	355	560	2300	3.62	NNCF5018V
SL184920	100	140	40	191	370	2200	1.95	NNCF4920V
SL185020	100	150	67	375	610	2200	3.94	NNCF5020V
SL184922	110	150	40	198	400	2100	2.15	NNCF49227V
SL185022	110	170	80	490	790	2000	6.32	NNCF5022V
SL184924	120	165	45	222	440	1900	2.95	NNCF4924V
SL185024	120	180	80	520	870	1800	6.77	NNCF5024V
SL184926	130	180	50	260	510	1700	3.95	NNCF4926V
SL185026	130	200	95	740	1220	1700	10.2	NNCF5026V
SL184928	140	190	50	270	550	1600	4.2	NNCF4928V
SL185028	140	210	95	780	1340	1500	11.1	NNCF5028V
SL184930	150	210	60	410	820	1500	6.65	NNCF4930V
SL185030	150	225	100	810	1400	1500	13.3	NNCF5053V
SL184932	160	220	60	425	880	1400	7	NNCF4932V
SL184934	170	230	60	435	930	1300	7.35	NNCF4934V
SL184936	180	250	69	570	1200	1300	10.8	NNCF4936V
SL184938	190	260	69	580	1270	1200	11.2	NNCF4938V
SL184940	200	280	80	690	1480	1100	15.8	NNCF4940V
SL184944	220	300	80	720	1590	1000	17.2	NNCF4944V
SL184948	240	320	80	740	1710	950	18.5	NNCF4948V
SL184952	260	360	100	1110	2490	900	32	NNCF4952V
SL184956	280	380	100	1150	2700	800	34	NNCF4956V
SL184960	300	420	118	1650	3800	750	53	NNCF4960V
SL184964	320	440	118	1720	4100	700	56	NNCF4964V
SL184968	340	460	118	1770	4300	650	59	NNCF4968V

SL18 Series

Full Complement Cylindrical Roller Bearing SL18 Series

Full Complement Cylindrical Roller Bearing SL18 Series is single row full complement cylindrical roller bearings, this kind of bearing has two integral flanges on the inner ring and one integral flange on the outer ring and can thus bear axial loads and fix axial location in one direction. The snap ring at the flangeless side of the outer ring can prevent roller from falling off. Compared with the cylindrical roller bearings with cage, it applies to situation for low-speed, heavy load.

Type	Dimensions			Rated load		Limiting speed	Mass	SKF
	(mm)			(mm)		(r/min)	(kg)
	d	D	B	Cr	Cor
SL183004	20	42	16	27.5	26.5	9000	0.11	NCF3004V
SL182204	20	47	18	41	37.5	7000	0.16	NCF2204V
SL183005	25	47	16	31.5	32.5	7500	0.12	NCF3005V
SL182205		52	18	46	45	6000	0.18	NCF2205V
SL192305		62	24	63	57	4500	0.37	NJ2305V
SL183006	30	55	19	40.5	43	6500	0.2	NCF3006V
SL182206		62	20	61	63	5000	0.3	NCF2206V
SL192306		72	27	87	85	3800	0.56	NJ2306V
SL183007	35	62	20	49.5	55	5500	0.26	NCF3007V
SL182207		72	23	76	77	4300	0.44	NCF2207V
SL192307		80	31	113	112	3400	0.74	NJ2307V
SL183008	40	68	21	59	68	5000	0.31	NCF3008V
SL182208		80	23	84	89	3800	0.55	NCF2208V
SL192308		90	33	152	155	3000	1.01	NJ2308V
SL183009	45	75	23	63	76	4600	0.4	NCF3009V
SL182209		85	23	88	96	3600	0.59	NCF2209V
SL192309		100	36	162	165	2700	1.37	NJ2309V
SL183010	50	80	23	77	92	4300	0.43	NCF3010V
SL182210		90	23	95	109	3300	0.64	NCF2210V
SL192310		110	40	205	215	2500	1.81	NJ2310V
SL183011	55	90	26	105	134	3700	0.64	NCF3011V
SL182211		100	25	122	145	3000	0.87	NCF2211V
SL192311		120	43	242	255	2300	2.28	NJ2311V
SL182912	60	85	16	54	74	3800	0.29	NCF2912V
SL183012		95	26	108	141	3500	0.69	NCF3012V
SL182212		110	28	152	179	2700	1.18	NCF2212V
SL192312		130	46	260	280	2100	2.88	NJ2312V
SL182913	65	90	16	57	81	3500	0.31	NCF2913V
SL183013		100	26	113	154	3200	0.73	NCF3013V
SL182213		120	31	177	213	2500	1.57	NCF2213V
SL192313		140	48	315	355	1900	3.52	NJ2313V
SL182914	70	100	19	76	108	3200	0.49	NCF2914V
SL183014		110	30	134	171	3100	1.02	NCF3014V
SL182214		125	31	183	226	2400	1.66	NCF2214V
SL192314		150	51	345	390	1800	4.33	NJ2314V
SL182915	75	105	19	78	116	3000	0.52	NCF2915V
SL183015		115	30	141	188	2800	1.06	NCF3015V
SL182215		130	31	190	239	2300	1.75	NCF2215V
SL192315		160	55	410	475	1700	5.3	NJ2315V
SL182916	80	110	19	81	123	2900	0.55	NCF2916V
SL183016		125	34	173	224	2600	1.43	NCF3016V
SL182216		140	33	223	280	2100	2.15	NCF2216V
SL192316		170	58	480	560	1600	6.32	NJ2316V
SL182917	85	120	22	102	155	2700	0.81	NCF2917V
SL183017		130	34	178	235	2500	1.51	NCF3017V
SL192217		150	36	255	320	2000	2.74	NCF2217
SL192317		180	60	510	620	1500	7.34	NJ2317V
SL182918	90	125	22	106	165	2500	0.84	NCF2918V
SL183018		140	37	207	280	2300	1.97	NCF3018V
SL192218		160	40	285	365	1900	3.48	NCF2218V
SL192318		190	64	560	660	1400	8.83	NJ2318V
SL182919	95	130	22	114	172	2400	0.86	NCF2919V
SL182219		170	43	335	430	1700	4.17	NCF2219V
SL192319		200	67	580	720	1350	10.2	NJ2319V
SL182920	100	140	24	132	199	2300	1.14	NCF2920V
SL183020		150	37	218	305	2200	2.15	NCF3020V
SL182220		180	46	390	520	1600	5.13	NCF2220V
SL192320		215	73	710	860	1300	13	NJ2320V
SL182922	110	150	24	137	213	2100	1.23	NCF2922V
SL183022		170	45	285	395	2000	3.5	NCF3022V
SL182222		200	53	455	590	1500	7.24	NCF2222V
SL192322		240	80	840	970	1150	17	NJ2322V
SL182924	120	165	27	176	285	1900	1.73	NCF2924V
SL183024		180	46	300	435	1800	3.8	NCF3024V
SL182224		215	58	530	730	1400	9.08	NCF2224V
SL192324		260	86	990	1220	1050	22.3	NJ2324V
SL182926	130	180	30	210	350	1800	2.33	NCF2926V
SL183026		200	52	430	610	1700	5.65	NCF3026V
SL182226		230	64	630	860	1300	11.25	NCF2226V
SL182928	140	190	30	228	375	1600	2.42	NCF2928V
SL183028		210	53	455	670	1500	6.04	NCF3028V
SL182228		250	68	720	1020	1200	14.47	NCF2228V
SL182930	150	210	36	305	490	1500	3.77	NCF2930V
SL183030		225	56	475	700	1500	7.33	NCF3030V
SL182230		270	73	830	1180	1100	18.43	NCF2230V
SL182932	160	220	36	320	520	1400	4	NCF2932V
SL183032		240	60	540	810	1400	8.8	NCF3032V
SL182232		290	80	1020	1460	1000	23	NCF2232V
SL182934	170	230	36	330	560	1300	4.3	NCF2934V
SL183034		260	67	710	1070	1300	12.2	NCF3034V
SL182234		310	86	1140	1660	950	28.65	NCF2234V
SL182936	180	250	42	410	690	1300	6.2	NCF2936V
SL183036		280	74	820	1260	1200	16.1	NCF3036V
SL182236		320	86	1180	1760	900	29.8	NCF2236V
SL182938	190	260	42	455	790	1200	6.5	NCF2938V
SL183038		290	75	840	1320	1100	17	NCF3038V
SL182238		340	92	1300	1900	850	35.65	NCF2238V
SL181840	200	250	24	178	320	1200	2.57	NCF1840V
SL182940		280	48	550	940	1100	9.1	NCF2940V
SL183040		310	82	960	1530	1100	21.8	NCF3040V
SL182240		360	98	1420	2040	850	43.12	NCF2240V
SL181844	220	270	24	187	350	1100	2.8	NCF2240
SL182944		300	48	570	1040	1000	9.9	NCF2944V
SL183044		340	90	1150	1810	1000	28.4	NCF3044V
SL181848	240	300	28	212	405	1000	4.4	NCF1848V
SL182948		320	48	600	1130	950	10.6	NCF2948V
SL183048		360	92	1210	1990	900	30.9	NCF3048V
SL181852	260	320	28	222	440	950	4.71	NCF1852V
SL182952		360	60	790	1460	900	18.5	NCF2952V
SL183052		400	104	1620	2550	800	44.5	NCF3052V
SL181856	280	350	33	305	600	850	7	NCF1856V
SL182956		380	60	920	1740	800	19.7	NCF2956V
SL183056		420	106	1660	2700	800	48	NCF3056V
SL181860	300	380	38	375	730	800	10	NCF1860V
SL182960		420	72	1180	2230	750	31.2	NCF2960V
SL183060		460	118	2040	3350	700	66.6	NCF3060V

Cylindrical Roller Bearings

Full Complement Roller Bearings

Full Complement Cylindrical Roller Bearings

Full Complement Cylindrical Roller Bearings SL04 Series

Full Complement Cylindrical Roller Bearings SL1850 Series

Full Complement Cylindrical Roller Bearing SL18 Series

Product Parameter

Full Complement Cylindrical Roller Bearings SL04 Series

Full Complement Cylindrical Roller Bearings SL1850 Series

Full Complement Cylindrical Roller Bearing SL18 Series

SUYU MACHINERY

Products

Application

News

inquiry

Cylindrical Roller Bearings

Full Complement Roller Bearings

Full Complement Cylindrical Roller Bearings

Full Complement Cylindrical Roller Bearings SL04 Series

Full Complement Cylindrical Roller Bearings SL1850 Series

Full Complement Cylindrical Roller Bearing SL18 Series

Product Parameter

Full Complement Cylindrical Roller Bearings SL04 Series

Share

SUYU MACHINERY

Products

Application

News

inquiry